Digital coating thickness measuring devices are ideal for measuring paint thickness on metal surfaces. In the automobile sector, it gives answers to questions such as whether the car body has been painted before, or whether the car body has been repaired, does the car body need paint in a few seconds. At the same time, Mega Nitrometer is the most suitable product of Sail Technology in industrial uses.

The device is suitable for the use of areas such as vehicle experts, gallerists, painters, metal maintenance units, machine manufacturers, thin film manufacturers packaging sector.

The difference of the Mega Nitrometer from the Pro Model is its large screen, the fact that it saves energy by running on 2 pen batteries, and a more durable outer case.

High Efficiency

1% margin of error

LCD Display

Easy Calibration

Runs on 2 Pen Batteries

0-1250 Micron Measurement Capacity

Measuring Both Hard Metal and Aluminum

Ber Carrying Pouch or Bag

Technical Specifications:

• Display: 4 digit 10 mm LCD
• December: 0-1250 um/ 0-50 mil
• Other December can be defined
• Resolution: 0.1um(0-99.9um)1 um(over 100 um)
• Sensitivity: ±1-3%n or 2.5um or 0.1 mil.< / li>
• PC interface: RS232 cable
• Working conditions: 0-50°C temperature, 80% humidity.< / li>
• Size: 126x65x27 mm (5.0x2.6x1.1 inch) Weight: about 81 g (Battery is not included)

Measurement Values:

The vehicle between 0 and 160 Decimals is unpainted. Each company throws different thickness of paint. A reference should be taken from a region where there is no paint.

There is either a pastry polish on the vehicle between 160 and 200 microns, or the paint has been scraped off and Decolored again. This area needs to be examined in detail by eye.

There is a single coat of paint on the vehicle between 200 and 300 Decimals.

There is more than one coat of paint on the vehicle between 300 and 1250 Decimals or puttying has been done.

Digital paint thickness measuring devices (F&N F TYPE)

Measuring Both Hard Metal and Aluminum

Despite their complex functions, paint measuring devices are small in size, light in weight and quite easy to carry.

With its robust structure and suitable measurement techniques, users can benefit from this device for many years.

Box Contents:

• Warranty Certificate
• 1 piece carrying case
• 1 built-in F probe
• 1 built-in NF probe
• 1 set of calibration sheets

ATTENTION!!!

Devices sold on the market (99% u) CANNOT MEASURE the following tools!

The price of those who measure is 3000 TL and above!!

SOME EXAMPLES:

* FORD FOCUS MONDEO ROOF AND FENDERS

* CITROEN C3 - C4 - C5 ENGINE HOOD FENDERS

* PEUGEOT 207-307 -308 -407 ROOF, ENGINE HOOD and FENDERS

* OPEL ALL SERIES ROOF HOOD AND TRUNK

How is the Calibration Setting Performed? (Calibration Reset)

Fe and NFe must be reset separately. Reset should be performed by placing the device separately on the metal and non-metal plate and holding down the on and off button until the beep sounds. It will write 0 on the LCD screen. If the device is not on one of the plates when pressing the device reset button, the reset is invalid.