Setra BUS models with Euro 6.2 engines stand out in the industry thanks to their modern engine and exhaust systems, which offer high performance and environmentally friendly emission values. However, these advanced technological systems can sometimes cause difficulties for drivers due to various malfunctions and error codes. This is where the

Setra BUS Euro 6.2 Fault Code Cleaner (DTC Eraser) comes into play, enabling fast and effective resolution of such electronic issues. This advanced device easily deletes error codes related to the engine, AdBlue system, exhaust, suspension, and other electronic systems in your Setra bus. Thanks to its Plug & Play structure, no technical knowledge is required for installation — just plug it into the vehicle’s OBD port and it starts working.

Systems cleaned by the Setra BUS Euro 6.2 DTC Eraser: 

• Brake System
• Engine Control System
• Vehicle Central Computer
• Automatic Transmission
• Suspension
• AdBlue System
• Retarder,
• Tachograph

Instructions for use:

• Ignition On: Turn the ignition on without starting the engine.
• Connect the DTC Eraser: Plug the device into the vehicle’s OBD port.
• Wait 30 Seconds: Wait briefly for the device to activate.
• Turn Ignition Off: Switch off the ignition.
• Remove the Device: Carefully remove the DTC Eraser.
• Wait 30 Seconds: Wait another 30 seconds before starting the engine.
• Start the Engine: After following these steps, all faults will be cleared. If not, repeat the process or inspect the faulty component.

This device supports disabling torque and speed reduction caused by exhaust aftertreatment system faults (when the faulty part has been repaired or replaced).