Arduino Sensor And Modules

Thanks to this ultrasonic sensor, which can measure between 2cm and 400cm range and with 3mm accuracy, you can be used in various distance reading, radar and robot applications.

This clock module, which has Dallas DS1302 Integrated, real time and has a battery slot to not reset the clock, can always give the time correctly.

DHT11 Temperature and Humidity Sensor Board is a module with DHT11 sensor on it, which is made easier for different uses or inserted into a drawer breadboard.

Arduino SD card module is a product that you can read and write to SD cards via SPI protocol. It is quite affordable and convenient.

It is a very easy to use Voltage control module. Input and output sockets are in standard pin structure. The headers are seen as soldered. Keeping the 6VDC – 12VDC range helps to stabilize the input voltage at 5VDC. The output current can be up to 800mA.

AMS1117 3.3V is a minimal voltage regulator module that you can easily use. Since it has minimal dimensions, it does not take up space in your projects.

It can detect in flame or in a light source with a wavelength of 1100 nm at 760 nm.

5 Channel fire detector sensor board is a sensor board used to detect fire with a wavelength between 760 nm - 1100 nm. It contains 5 IR receivers on it. It can be used as a fire detection sensor in fire extinguishing robots. Sensitivity can be adjusted with the trimpot on it. It can be output in both analog and digital form.

It is based on the MCP2515 CAN controller with SPI interface and the TJA1050 CAN transceiver. 

This card, which has an integrated MCP2515 CAN-SPI converter, performs the same function as the CANBUS Shield.