PCB And Modules

DC-DC Voltage Converter is an adjustable automatic step up-down converter with LM2596S and XL6009 integrated on it.

The LM2577 DC-DC Step Up Module is a DC-DC step-up converter capable of making a DC output voltage in excess of the input voltage.

In most robot projects, you need a joystick. XY Joystick Module provides an easy and inexpensive solution to this need.

The Humidity Sensitive Relay Module 5V can automatically control a load such as a fan or misting pump according to the humidity level.

The MT3608 2A Max DC-DC Progressive Power Module product is an amplifier board designed for Arduinos, increasing the input value in the range of 2V and 24V up to 28V. It gives output up to 2A.

Thanks to this module, which can regulate DC - DC voltage in a wide range, you can supply between 4V and 40V at input voltage and output up to 2A between 1.25V and 37V.

It is a converter board that contains the FT232RL integrated on the USB-Serial converter board.

This 433 Mhz RF kit (Transmitter - Receiver) consists of a transmitter and a receiver module.

You can adjust the output voltage according to your request via the trimpot on it. This module, which is very useful with its small dimensions, has the LM2596 regulated integrated on it. The circuit can carry current up to 3A DC. A small deviation margin of 30 MV provides a great advantage over other DC-DC converters. Note: Since the product is a voltage reducer, the output voltage cannot be more than the input voltage. If you connect a 30V input, you can set the desired voltage 0-30V range. However, if you connect 12V to the input, you can set the output range of 0-12V.