Brand: Power-Xtra Chemistry: Li-Po, Lithium Polymer Voltage:3.7V Capacity: 800mAh Size: 6.0 mm x 30 mm x 35 mm Origin: China Features: Circuit, Wired

OBD2 Coupler Cable 9 Pin T Cable is sold by shipping after all tests are carried out by our company.

16 Pin 1 Male to 2 Female OBD2 Cable Vehicle Diagnostic Extension Cable

Grommet gate tires are known as (cable gate tires). Usually grommet crossover tire is used in electrical, electronic environments. It is an effective and economical sealing element used to provide noise and vibration insulation in engines, machines and other mechanisms. Crossover tires are used in a wide variety of areas in today's industry. It can be produced in different sizes and types. Places of use; It is generally used in electronics, computer accessories, laboratory equipment and various other instruments.

Since the Car Fault Detector has complete documentation and good explanations of the AT commands, you can even write your own software platform to the specified hardware if you wish. Superior Quality: This Car Diagnostic Tool is precisely and strictly manufactured in accordance with production requirements. The Car Diagnostic Tool quality is strictly controlled and the quality fully meets the standard requirements.

It is a type of wire solder containing flux used worldwide for TV, electronics and consumer goods. It is produced with first class raw materials and the highest purity tin and lead alloys with 5 channels, containing a nominal 2% flux by weight in the channels.

Soldex brand 250 gram solder paste is a non-corrosive, wetting-featured solder paste used in all electrical and electronic soldering processes, as well as on difficult-to-solder metals such as brass and nickel. It has no electrical conductivity. It is highly active.

Soldex brand 50 gram solder paste is a non-corrosive, wetting-featured solder paste used in all electrical and electronic soldering processes, as well as on difficult-to-solder metals such as brass and nickel. It has no electrical conductivity. It is highly active.

The TJA1050 is an interface and physical bus between the CAN protocol controller. The device provides differential transmit capability to the bus and differential receive capability to the CAN controller.

The XL4015 DC DC Voltage Regulator is a very small converter that can adjust the input voltage between 8V and 36V to the output voltage between 1.25V and 32V.

The LM2577 DC-DC Step Up Module is a DC-DC step-up converter capable of making a DC output voltage in excess of the input voltage.