Mack Adblue (SCR) Emulator

Mack generally use in United States with epa10 and epa14 emission standarts.These standarts are different than Euro standarts. Mack Series give many faults that they are generally about SCR and DPF systems or Nox sensors. Soot level stuck is big problem too on Mack series.Sometimes soot level going up then you cannot reset via diagnostic tool.This is a cronical problem on Mack series. You can decrase soot level with adblue emulator without soot ratio reset on Tech Tool .These problems cause lost money and time to you.So many user use Mack adblue emulator to solve all Adblue system faults. And users can avoid expensive repair costs and lost time by use Adblue emulator

Mack Adblue Removal Emulator designed to cancel adblue system on all volvo engines (Trucks, Busses, Construction machines).Mack adblue cancelletion device cancel all adblue system on your truck. Then truck never consume DEF liquid anymore. And you do not see any adblue system fault on the dashboard. Mack adblue remove device prevent all lost torque faults.

This device connect to ACM (Adblue Control Unit) socket's can lines where middle of chasis.epa10 Series have 1xCan-Bus line but epa14 Series have 2xCan-Bus Lines. So they have different connection styles. After the connection , adblue system disable. And if you have any adblue system fault (Nox sensor, Nh3 sensor, DPF filter, Def pump), Mack emulator solve your all problems.

Mack Adblue Emulator can disable these stsyems

Adblue Pump

Nox Sensors

Exhaust Temperature Sensors

DPF Differential Pressure Sensor

AdBlue Level ve Temperature Sensor

ECU(Acm line only)

ADblue Control Unit

DPF regeneration

systems disable after start to use adblue emualtor on your US standart truck.You dont get any SCR,DPF system fault after connection. And you solve all high soot level faults with this emulator.

Mack Adblue Removal can solve these faults;

• Stuck Soot Level Fault (144% or 88%)
• Nox Sensors Faults
• Adblue Pump Fauls
• Adblue Quality Faults
• Nh3 Sensor Faults
• DPF Faults
• Regeneration Faults
• Torque loss faults
• Soot Level Critically High
• Supported models
• Mack epa10
• Mack epa14
• Mack epa17
• EPA10 emulator supports 2010-2013.
• GHG 14 emulator supports 2014-2016.
• GHG 17 emulator supports 2017-2020.
• GHG 21 emulator supports 2021 and onwards.

Mack epa10 and epa14 AdBlue Remover Advantages;

-You dont need adblue fuel

-Prevent all of adblue sytem faults

-Prevent torque loss

-You dont get and adblue or NOx fault

NOTE: You can see some DTC code about Adblue system after the connection. And you may need erase with diagnostic device (VOCOM Tech Tool).