Autovei

License PSM - read/write full Flash & Eeprom Mercedes PSM module in BDM mode.
Full cloning.

License EBS Read/Write Flash/EEPROM;

EHZ (E-MAS) Flash & EEPROM Read/Write by DirectConnect2U in BSL mode

No need to open control unit.

License GS2 - allows to Read / Write gearbox flash/eeprom GS2 (EPS3) by WABCO.
Mercedes truck MP1, MP2, MP3. Euro 1-5.

License GS1 - to read/write Flash & Eeprom of Mercedes gearbox ECU GS1 (EPS).
Full cloning.

MCU: C167CS

On bench in BSL mode.
Need to open ECU.

Calculate codes for VeDoc ( X1, X2, X8); FDOK (XT, XS, XN) algorithms for PLD, and MCM, DAS password

License MB KEYS - allows to program transponder keys to MR PLD ECU's. Make immo off/on in MR PLD and FR/CPC control modules.
Mercedes truck. MP1, MP2, MP3. Euro 1-5.

The China Truck EDC17CV44 module allows you to view, compare, and edit firmware files for FAW, Shacman, MAZ, Yutong vehicles with Weichai WP7, WP10, WP12 engines. It also supports firmware for CAMC, HOWO, Sinotruk, Hongyan, Dongfeng trucks equipped with Bosch EDC17CV44 control units. Important: The module does not correct CS checksums. It is recommended to use the Combiloader programmer to read and write firmware. This programmer automatically adjusts checksums before writing the file to the ECU.

The module allows you to view, edit, and compare the firmware files of IVECO vehicles with a diesel engine and Bosch MD1CE101 ECU. It is possible to open and edit firmware files only in *.bin format. The module does not correct CS checksums while saving the files. Recommendation: It is recommended to record files using the Dimsport New Genius or Trasdata. These programmers automatically fix the CS checksums before writing to the ECU.

The Ford EDC17CV41 Module 24 allows you to view, compare, and edit firmware files for Ford Cargo F-Max vehicles equipped with the Bosch EDC17CV41 ECU. Important: The module does not correct CS checksums. It is possible to open and edit firmware files only in *.bin format. It is recommended to use the Bosch MEDC17 BSM Combiloader programmer to read and write firmware. This programmer automatically adjusts checksums before writing the file to the ECU.

The module allows you to view, compare, and edit the firmware files of MAN EDC17CV42. Calibrations available for editing include: boost pressure, fuel pressure, fuel supply, fuel supply correction, injection phase, request and torque limit, sensor calibration, and DTC error mask.

The module allows you to view, edit, and compare firmware files for MAN vehicles with the Bosch MD1CE100 control unit. It is possible to open and edit firmware files only in *.bin format.