It is a type of wire solder containing flux used worldwide for TV, electronics and consumer goods. It is produced with first class raw materials and the highest purity tin and lead alloys with 5 channels, containing a nominal 2% flux by weight in the channels.

Soldex brand 250 gram solder paste is a non-corrosive, wetting-featured solder paste used in all electrical and electronic soldering processes, as well as on difficult-to-solder metals such as brass and nickel. It has no electrical conductivity. It is highly active.

Soldex brand 50 gram solder paste is a non-corrosive, wetting-featured solder paste used in all electrical and electronic soldering processes, as well as on difficult-to-solder metals such as brass and nickel. It has no electrical conductivity. It is highly active.

The TJA1050 is an interface and physical bus between the CAN protocol controller. The device provides differential transmit capability to the bus and differential receive capability to the CAN controller.

The XL4015 DC DC Voltage Regulator is a very small converter that can adjust the input voltage between 8V and 36V to the output voltage between 1.25V and 32V.

It is an affordable and breadboard compatible development board that aims to easily set up and run your Esp8266 based projects.

DS3231 RTC module is a real time clock module that you can use for precise clock reading in your various Arduino projects. It is 100% new and high quality.

Multi-Function Expansion Card; It is a multifunctional expansion board that contains many components such as DHT11, LM35, Temperature and Humidity sensor modules.

Arduino NANO is a V3 version functionally similar to the Arduino Uno but with a much smaller Atmega328 SMD IC.

5v 30a 1 Channel Relay is a relay module with chip optocoupler isolation, strong driver capability, stable performance, 30a relay and 5mA trigger current.

The 0.66-inch OLED module is an OLED display with a response time of just a few microseconds, faster response time than TFT-LCD. It has low temperature characteristics and can be used normally even at minus 40°C.

The TPA3118 PBTL Mono Digital Amplifier Board is an audio power amplifier board that makes it adequate for transmitting low-power, inaudible electronic audio signals such as radio receivers or electric guitar receivers to speakers or headphones.