Home
-
DAF Euro 5 DTC Eror Code Cleaner
$100.68It can be used as plug and play or with the installation in the Can-Bus vehicle module. It helps you to continue your journey by deleting the fault codes in the vehicle in a short time in vehicles that give warning alerts.
-
Ford Euro 5 Adblue Cancel Emulator
$49.00Ford Euro 5 Adblue Cancel Emulator Heavy Vehicle is designed to override the AdBlue exhaust catalytic system in trucks, buses and lorries. The AdBlue cancel device electronically ignores the Adblue system in the vehicle. The installation of this device is done in the vehicle engine (ECU) and is easy to install. After installation, the vehicle's Adblue system is deactivated and the emulator does not damage the vehicle in any way (for example: dropping the vehicle from the trailer, turning on the malfunction light, etc.).
-
Man Euro 5 Adblue Cancel Emulator
$49.00Man Euro 5 Adblue Cancel Emulator Heavy Vehicle is designed to override the AdBlue exhaust catalytic system in trucks, buses and lorries. The AdBlue cancel device electronically ignores the Adblue system in the vehicle. Ford Adblue emulator works perfectly with heavy Euro 5 vehicles and can be used in trucks, buses, etc. It is easily installed in vehicles and instantly regulates your vehicle's Adblue values and emissions.
-
Scania Euro 5 Adblue Cancel Emulator
$49.00Scania Euro 5 Adblue Cancellation Emulator Heavy Duty is designed to override the AdBlue exhaust catalytic system in trucks, buses and lorries. The AdBlue canceller electronically ignores the Adblue system in the vehicle This device is mounted on the vehicle engine (ECU) and is easy to install. After installation, the vehicle's Adblue system is deactivated and the emulator does not damage the vehicle in any way (e.g. the vehicle falls off the trailer, the fault light comes on, etc.)
-
Renault Euro 5 Adblue Cancel Emulator
$49.00Renault Euro 5 Adblue Cancel Emulator Heavy Vehicle is designed to override the AdBlue exhaust catalytic system in trucks, buses and lorries. With this emulator, you can also deactivate the Adblue system in vehicles with an Adblue fault in the Adblue system (e.g. Sensor nox).
-
Arduino Pro Mini 3.3V/8 Mhz
$4.07Arduino Pro Mini 3.3V/8 Mhz The Arduino Pro Mini board is sent solderless with the male header next to it.
-
Arduino Pro Mini 5V/16 Mhz
$5.30Arduino Pro Mini is a development/prototype board that works with 5V and has an Atmega328 microcontroller on it. The point that distinguishes Arduino Pro Mini from other boards is that there is no USB input or interface on it, so you need to load programs with a simple FTDI programmer to program Arduino Pro Mini).
-
Arduino Due 3.3V Clone
$21.43Clone Arduino Due is a prototype / development board using 32-bit Atmel SAM3X8E ARM Cortex-M3 processor. Thanks to its 54 digital input / output pins and 12 analog inputs, it is perfect for using in your medium and large projects.
-
TP4056 5V 1A XD58A Protected Lipo Battery Charging Module
$0.41The module is built with TP4056 lipo charging chip. It can charge 1-cell lithium batteries or charge parallel connected batteries. TP4056 is capable of precise charging due to its simple circuit structure, good protection feature. This module has a fully automatic charging mechanism. It is made of SMD materials.
-
TP4056 5V 1A Mini USB Lipo Battery Charge Module
$0.54TP4056 5V 1A Mini USB Lipo Battery Charger Module
-
TP4056 Lithium Battery Charge Module Micro USB
$0.75The charging current is set at 1A. Most phone/USB chargers today give 1A and above. To be sure, you can look at the values on the phone charger. If you want, you can change the current value by changing the resistance.
-
LM2596 Adjustable Voltage Regulator
$2.03You can adjust the output voltage according to your request via the trimpot on it. This module, which is very useful with its small dimensions, has the LM2596 regulated integrated on it. The circuit can carry current up to 3A DC. A small deviation margin of 30 MV provides a great advantage over other DC-DC converters. Note: Since the product is a voltage reducer, the output voltage cannot be more than the input voltage. If you connect a 30V input, you can set the desired voltage 0-30V range. However, if you connect 12V to the input, you can set the output range of 0-12V.