Tüm Kategoriler
THINKCAR PROG2 Immobilizer Kodlama Cihazı
590,00 $
THINKCAR PROG2, araba anahtarı verilerini okuma, kopyalama, yazma ve diğer araba anahtarı ile ilgili işlevleri destekler. Eski anahtar verilerini kopyalamak ve yeni anahtarı yapmak için yeni anahtara yazmak için araba anahtarı programlama işlevini kullanabilirsiniz.
-
Güvenli Alışveriş
-
Hızlı Teslimat
-
Kolay İade
-
Memnun Müşteri
THINKCAR
PROG2
Advanced Key Fob Programmer and IMMO Tool
Car Key Match
Remote Control Match
Read and write Key Chip Data
Car Key Programming
THINKCAR PROG2 supports read, copy, write car key data, and other car key related functions. You can use car key programming function to copy the old key data and write into the new key to make the new key.
Gear Box Programming
THINKCAR PROG2 supports Gearbox programming to restore the old gearbox data or replace the old gearbox to write the new data.
Main Function
THINKCAR PROG2 is mainly used for reading and writing car key chip data, including EEPROM reading and writing, on-board MCU reading and writing, Benz infrared key generation, special key generation, BMW engine ins code reading, BMW cas4 + / FEM chip reading and writing, etc.
EEPROM reading
and writing
On-board MCU reading
and writing
Benz infrared
key generation
Special key
generation
BMW engine ins
code reading
BMW cas4 + / FEM chip
reading and writing
Main Features
Advanced All-in-one key chip/ anti-theft chip read and write.
Support 1000+ common ECU/MCU/ EEPROM.
Support 1000+ common ECU/MCU/ EEPROM.
Volkswagen's fourth-generation
UDS engine chip read and write.
Volkswagen/Audi fourth-generation
UDS engine replacement (after 2016 year).
Volkswagen/Audi MQB platform
engine/gearbox, dashboard, steering
column replacement.
Audi fourth-generation EZS, comfort computer VW, and KESSY chips replace.
Audi fifth-generation gearbox ECU replace.
Compatible with THINKTOOL Series
THINKCAR PROG2 is compatible with THINKTOOL MASTER, THINKTOOL MASTER X, THINKTOOL MAX diagnostic equipment.
THINKTOOL Max
THINKTOOL X10
THINKTOOL Master X
THINKTOOL Master/Master II
Note: The THINKCAR PROG2 will need to be used with THINKTOOL series. The PROG2 is with free software updates for the life of the tool.
THINKCAR Diagnostic equipment
CAR
THINKCARPROG2
Input Currency:
500mA
Working Temperature:
0℃-50℃
Storage Temperature:
-20℃～70℃
Package:
39*107*298mm
EEProm Port:
26PIN, 16PIN
Supporting List
THINKCAR PROG2 supports common ECU, MCU and EEPROM in the market, which is more than 1,000 brands, and we are continuously updating and extend the coverage.
| Support common ECU MCU | |||
| Atmel | GI | RenesasM32R | ST |
| Fujitsu | GigaDevice | Renesas R32C | Renesas V850 UART |
| Infineon | Grundig | Renesas R8C | Samsung |
| MC68HC05 | HOLTEK | Renesas V850 SPI | SiLabs |
| MC68HC08 | Hynix | MicroChip | |
| MC68HC11 | I2C | Nordic | |
| Support common EEPROM | |||
| 4Wire | ITT | Numonyx | SST |
| Adesto | KHIC | OKI | ST |
| Infineon | AKM | MacroChip | ON Semi |
| Altera | Micron | Other | Winbond |
| Atmel | Mitsubishi | Philips | |
| Catalyst | KHIC | PMC | Spansion |
| Chingis | MacroChip | Rohm | NEC |
| EON | Micron | Samsung | NSC |
| ESMT | MicroWire | Seiko | Ford |
| EXEL | Mitsubishi | Siemens | Fujitsu |
| Fairchild | Motorola | Sony | |
Specification
Car key slot:
place for car key to perform the key matching.
place for car key to perform the key matching.
DB26:
connect to the anti-theft wiring harness, such as data line for all lost fourth-generation
instrument key.
connect to the anti-theft wiring harness, such as data line for all lost fourth-generation
instrument key.
Benz key infrared slot:
place for Benz infrared key to make key matching.
place for Benz infrared key to make key matching.
Car key chip hole:
place for key chip to make key matching.
place for key chip to make key matching.
Status indicator:
power indicator.
power indicator.
DIP slot:
connect the pins of the anti-theft ECU chip through the cable to read and write data.
connect the pins of the anti-theft ECU chip through the cable to read and write data.
DC12V :
connection with DC12V power.
connection with DC12V power.
DB15:
connect to the main wiring harness.
connect to the main wiring harness.
PRO864
Belirli Referanslar
Ürün Yorumları
Şuan hiç yorum yok
THINKCAR PROG2, araba anahtarı verilerini okuma, kopyalama, yazma ve diğer araba anahtarı ile ilgili işlevleri destekler. Eski anahtar verilerini kopyalamak ve yeni anahtarı yapmak için yeni anahtara yazmak için araba anahtarı programlama işlevini kullanabilirsiniz.